Description
This aroma injector attaches to your 40mm gas mask (NATO or GOST threading) and lets you control exactly when and how much aroma is introduced to the wearer.
The injector also has a female 40mm connection for you to attach a standard filter or gas mask hose to. We suggest a short hose is a good idea, as it prevents too much excess aroma from being expelled into the room.
WARNING: Always use this product carefully and well within your (or your play partner’s) limits. Remember: Safe, Sane, Consensual.
Always clean the aroma pot out immediately after use, and try to prevent aroma from contacting the silicone parts of the device – aroma degrades silicone and causes it to discolour and go brittle.
Don’t forget your Lenscaps! For a sleek, consistent look for your S10 Gas Mask why not add a set of our S10 Lenscaps?
Customising your Gen.3 Pump
New for Gen.3 is basic customisation at no extra cost:
- Choose your Main colour from our ‘standard’ options
- Choose your Accent colour from our ‘standard’ options
- Choose your Tubing colour from our ‘standard’ options
- Choose your Endplate Design from our ‘standard’ options
As well as our standard options, we also have a number of premium choices – these add a small amount to the overall cost of your pump (to account for increased material costs). Matte materials have a nice, slightly dulled finish which looks great in photos. Metallics have a lustre and reflective finish (Gunmetal looks particularly stunning!).
Carbon Options are made from carbon-fibre reinforced filaments. These are very hard wearing and have our most matte finish (the carbon black is my personal favourite!). Given the properties of the material, they add significant wear to our ptinters – so carry a slightly higher price to cover replacement parts.
Tubing Length is specified in two parts:
- Pot Tube Length refers to the approximate distance between the bottom of the pump body and the top of the aroma pot.
Longer lengths here give you more flexibility in how you or your sub is positioned, and will reduce any ‘overspill’ of aroma from the pot if there is a larger pressure differential (for example if you’re using restrictor valves or the like, a small amount of aroma may be ‘pulled’ out of the pot at shorter lengths) - Pump Tube Length refers to the approximate distance between the pump body and the squeeze bulb.
Longer lengths here mean you can be further from your sub when using the pump, at the expense of having to pump a bit more to achieve the same airflow
The new Accent Stripe option allows you to add a 5mm stripe in your accent colour in the middle of the pump body. This looks particularly striking when there is a high contrast between your chosen colours (eg. Carbon Black and Fluro Yellow).
The most common cause for a pump needing a repair is overexposure of the silicone tubing to aroma (causing them to become brittle and split) – often because the pot has not been cleaned out immediately after use or a cotton wool ball has not been used.
You can add an additional set of tubes (including fastenings) to perform a repair yourself without having to return the pump if you encounter this in the future.
Please note that if your tubes split due to not following the advice in the included user guide and you need to send the pump in for repair, you’ll be responsible for the associated material and postage costs (we’ll do this at cost price for you, though!)
Anaesthesia Masks
You can optionally add an Anasthesia Mask adaptor – this will convert a standard 22F Anaesthesia mask into a NATO 40mm thread – pefrect for attaching your new Gen.3 Pump! No mask? No problem – we can also supply a mask and strap if you choose the ‘with mask’ option.
Please Note: The Anaesthesia Mask Adaptor may be too short for some older masks (usually black in colour, with a black rubber facial interface). If you require a longer adaptor, get in touch!
What’s in the box?
In the box you will receive:
- 1x Gen.3 40mm Injector Assembly in your chosen colours
- 1x Hand Pump Bulb in black
- 1x Aroma Pot
- 5x Cotton Wool Balls
Custom Orders
Want your pump in more than one colour? Have a special request for a different endplate?
I love making up custom one-off pumps! Drop me a message from the ‘contact us‘ page or via a Twitter DM and I’ll be happy to provide you with a custom quote!
Lead time
These are all made to order in my free time – so depending on the volume of orders and whether I have component parts in stock, it may take a few weeks to ship out your order. If your order is going to take longer I’ll be in touch!
You can see an indication of current lead times at the top of this page.
